Front Clip Modifications

Grille
-- Factory Grille slots - removed and replaced with custom mesh
-- Opening Scanned & Digitized to create a wood buck
-- Mesh grille Hammer Formed around wood buck

Sonoma GT Ground Effects
-- Fender Cladding molded in Fiberglass ( widend to match fender )
-- Mounting hardware replaced with direct mount to bed side

Front Cover
-- Molded in Fiberglass

-- Intercooler Opening cut into lower portion of front cover
-- Opening Scanned & Digitized to create a wood buck
-- Mesh grille Hammer Formed around wood buck
-- Grille installed on the rear of opening

-- Driving Lights removed and now used for Air Intake Ducts
-- Opening Scanned & Digitized to create a wood buck
-- Mesh grille Hammer Formed around wood buck
-- Grille installed on the rear of opening

Core Support
-- Forward mounted AC Condensor
-- Intercooler mounted thru lower Portion of Core Support
-- Horizontal Cross brace ( Twin Tube design to match back Half chassis )
-- Radiator mounted on Welnuts to absorb vibration and prevent fatigue ( access holes on front of support )

-- Straightened
-- Factory Vertical lip removed to smooth the top
-- Support frame boxed to add rigidity

-- Intercooler Elbow mounted thru support

-- Overflow bottle hidden above intercooler
-- PS Resivoir  Mounted on custom mounts
-- Relief cut into lower portion of core support to allow removal of air cleaner lids

Hood
-- Custom Twin Scoop Cowl Induction Hood
-- Factory Bracing removed
-- Billet Hood Pins & Skuff plates ( pins act as hood level adjuster

Fenders
-- Lips rolled and smoothed
-- Inner structure cut and raised 2 1/2" to allow wheel clearence

Inner Fenders
-- Custom made to allow full turning radius
-- Multiple mounting points on Firewall and Fender


Cab Modifiactions

Wiper Cowl
-- Straightend to match firewall
-- Specialty Power Window mounted for Future use

Firewall
-- Set back 2.5" to gain more engine bay ( allow for better turbo placement )
-- Exhaust reliefs cut into firewall
-- Wheel tub reliefs cut into firewall

Floor
-- Transmission Tunnel raised to allow clearence for 4l80 Transmission
--  Front Body Mounts boxed and braced to add rigidity for Roll Bar mount

Roll Cage
-- 8 Point Cage ( 6 Point inside cab )
-- Cage has alignment bolts that "Positions" Cab on the chassis

Doors
-- Welded hinges removed and replaced with Adjustable hinges on "A" Pillar
-- Welded hinges removed and replaced with Adjustable hinges on Doors
-- Door handles & locks shaved ( AVS Door Poppers Installed )

Misc
-- "A" Piller body line matched to Fender
-- "B" Piller widened at rear most corner to align with Bed
--  Amplifier Mounts installed on back of cab.


Sonoma GT Ground Effects
-- Rocker Cladding molded in Fiberglass ( lengthened 1/2" )
-- Rocker Cladding has bar stock molded in to aid in straightness
-- Mounting hardware replaced with direct mount to bed side


Bed Modifications

Bed Side
-- Front of Bed Cut and pulled out to match with of "B" Pillar
-- Flattened to be horrizontal accross the top
-- Cut at Tailgate to align verticle side
-- Side Flared to Gain clearence
-- Fender Lips Rolled Smooth

Sonoma GT Ground Effects
-- Bed Side Rocker Cladding molded in Fiberglass ( lengthened 1/2" )
-- Bed Side Rocker Cladding relief cut in for Exhaust Exit
-- Rear Corners molded in Fiberglass ( widened at Rear most corner to align with bed corner )

Wheel Tubs
-- Removed and Boxed to allow clearence for 30.5" tire
-- Inner bed side contoured to match frame ( allows frame to be seen )
-- Tubs to be panel Bonded to bed Sides

Bed Floor
--  Raised to clear rear suspension
--  Sub woofer enclosure on D-Side of Bed
--  Dual Battery enclosure on P-Side of Bed
-- Smoothed by tailgate area
-- Fuel Cell Access in Bed

Tailgate
-- Skinned for a smooth look
-- Handle Relocated to inside of bed
-- Lower Part of tailgate straigtened

Rear Bumper Cover
-- Bumper "J" Cut to allow gate to open past bumper
-- Cover molded in Fiberglass
-- Cover widened 1/2" on each side to match with of Tailgate


Misc.
-- Belly Pan to hide fuel cell
-- Wheel tub tied into belly pan
-- Billet Bed Shims machined to allow for perfect fit

• The Build
• Chassis
• Powerplant
• Interior
• Paint & Body